Features Supported
IOS Commands Implemented
Device Library

Features Supported

• Telnet in to routers and switches from local or remote machines and interact with the devices, just like real devices.
• Multiple users can connect at a time. The devices fully supports SNMPv1, v2, v3; TFTP and Cisco IOS software.
• Login and Logout of the Cisco devices.
• IPv4 or IPv6 Address can be assigned to the devices.
• Get into and out of different modes - User, Privileged, Configuration, Interface configuration, Router and Vlan modes.
• Save/Load a configuration of the devices/network.
• Script Editor to view and edit IOS command behavior scripts.
• Command customization with extensive script APIs.
• Command Configurator to define new IOS commands.

IOS Commands Implemented

• Set passwords, IPv4 or IPv6 addresses, clock rates, hostname etc.
• Enable/disable cdp service, configure cdp holdtime and timer.
• Display cdp and flash information.
• Configure access-list, display access-list configurations.
• Configure rmon alarms and events, remove alarms/events and display active alarms and events.
• Enable/disable SNMP trap service, configure recipients of the SNMP notification operation.
• Configure SNMP community, contact, location, packetsize etc.
• Specify the MTU value for the network interface node
• Enable RIP (Routing Information Protocol), configure RIP for a specific router.
• Configure vlan for a specific router.
• Enable BGP (Border Gateway Protocol) , configure BGP for a specific router.
• Enable OSPF(Open Shortest Path First) protocol, configure OSPF for a specific router.
• Enable EIGRP protocol, configure EIGRP for a specific router.
• Display startup and running configurations.
• Ping devices. Refer Detailed List of Commands

Device Library

Simulation toolkit bundles the following pre-configured devices supporting Cisco IOS.

• Router devices: Cisco 3600, Cisco 7600, Cisco1700, Cisco12000
• Switch : Cisco 3750, Cisco2950Switch, Cisco6500Switch
• Cisco PIX Firewall

Simulator Home

Telnet Support